Ok, but should I want to install a SID2SID with 8580s, how can I reduce the voltage?
Offline
0R360N
CMDR wrote:
Ok, but should I want to install a SID2SID with 8580s, how can I reduce the voltage?
Get a different board. They are specific to the SID, you can not use them interchangeably.
Offline
there is dude on mssiah forum who design new boards called sidx2 i believe you can install any sid in any c64 wit this board or even have 6581 and 8580 on 1 board. anyway find him and talk to him.
Offline
New York City
You need to build a circuitry to allow that. More trouble than you want.
6581 = old board
8580 = new board
with SID2SID or not.
Your 8580 is probably broken already anyway.
Offline
It's not sid2sid it's sidx2
all info in the world about sid you'll find on mssiah forum
Offline
São Paulo, Brazil
lukass wrote:
It's not sid2sid it's sidx2
all info in the world about sid you'll find on mssiah forum
not quite.
Offline
Some dudes even done this (6581/8580)with old sid2sid:
http://www.prophet64-forum.com/viewtopic.php?id=422
http://blog.gg8.se/wordpress/category/prophet64/
Some info on Sid2X board:
http://www.prophet64-forum.com/viewtopi … 90&p=2
Some guys on this forum are negative and ignorant.
Last edited by lukass (Mar 12, 2010 11:24 pm)
Offline
São Paulo, Brazil
lukass wrote:
Some guys on this forum are negative and ignorant.
Jesus, it's not my fault if your day was crap.
I was just saying I don't think the mssiah forum is that great... "ALL the sid information IN THE WORLD".
Offline
New York City
lukass wrote:
Some dudes even done this (6581/8580)with old sid2sid:
http://www.prophet64-forum.com/viewtopic.php?id=422
http://blog.gg8.se/wordpress/category/prophet64/Some info on Sid2X board:
http://www.prophet64-forum.com/viewtopi … 90&p=2Some guys on this forum are negative and ignorant.
I wasn't even talking to you, but to the original poster who mentioned the SID2SID (NOT SID2X).
You shouldn't be calling anyone ignorant or any names anyway.
As Pulselooper said all the information about SID is not to be found in the MSSIAH board for SURE.
Offline
For calling names I apologize. Maybe I should use word "lots" instead of "all".
Last edited by lukass (Mar 13, 2010 6:26 am)
Offline
New York City
lukass wrote:
Maybe I should use word "lots" instead of "all".
Maybe you just should chill out and not call names at all. It's that simple. I know it's hard, but try not to call names on those motherfucking ignorants.
Offline
England
Thretris wrote:
CMDR wrote:Ok, but should I want to install a SID2SID with 8580s, how can I reduce the voltage?
Get a different board. They are specific to the SID, you can not use them interchangeably.
akira^8GB wrote:
You need to build a circuitry to allow that. More trouble than you want.
It's dead easy, so long as you can solder. You replace VR1 with a 9V regulator, and the two filter
caps with 22,000pF. Takes about five minutes and costs about £1.
Offline
Halmstad, Sweden
Hey. Anyone know of or have a little more comprehensive guide on using SDI - Sid duzz it? The manual just didn't do it for me..
Just basic ( getting-started ) stuff as of how to navigate and creating instruments would be nice.
Offline
brighton, uk
Follow the goattracker tutorials and learn to use that, then SDI is piss, seriously.
Offline
Halmstad, Sweden
CMDR wrote:
Follow the goattracker tutorials and learn to use that, then SDI is piss, seriously.
I know goattracker and in my opinion running sdi on a c64 tends to sound better - more analog sounding.
But in user-friendly-ness I agree with you.
Offline
uhajdafdfdfa
Ninja tracker is quite similar to Goat tracker if you wanted to have something similar to it on the C64.