chipmusic.org is an online community in respect and relation to chip music, art and its parallels.
You are not logged in. Please login or register.
update ROM:
http://www.nanoloop.com/update/nanoloop279.mb
or load it via chrome:
https://dl.dropboxusercontent.com/u/370 … index.html
demo:
http://www.nanoloop.com/update/nanoloop279d.gba
To toggle the bar / dots view and note values, press A+START in the menu.
There are a few minor changes in this update:
- time cursor shows current position for step pause
- slower memory access on startup for better 2.5 cart compatibility
- improved contrast in inverted and b&w modes
Cool! If only i could get any of the updaters to work 
Which updater are you using? What happens when you try to update?
I made a few changes to the Chrome version of the updater, too and could finally test under Windows (8.1) where it works fine.
I've tried pc updater on win10 and mac updater and chrome on both machines. With 2 (or 3) different cables, been switching them around and trying almost everything. It starts to upload (nintendo logo disappears) but after that i get nothing. Been waiting for a long time. 40min - hour usually.
OK, let's focus on the Chrome version.
To check if the USB-MIDI works properly, click "MIDI mode" and click on "MIDI" of the mode buttons. It should immediately say "MIDI mode OK". If it just shows "..." below the buttons, something is wrong.
So is this primarily a graphical update?
OK, let's focus on the Chrome version.
To check if the USB-MIDI works properly, click "MIDI mode" and click on "MIDI" of the mode buttons. It should immediately say "MIDI mode OK". If it just shows "..." below the buttons, something is wrong.
Like this?
Yes.
If you have the right cable type (any cable that's GB Pocket / Color compatible, GBA cable does not work) and the adaptor plugged in as shown in the image, it should be possible to update.
Oh dang, it suddenly is working now! So good. So awesome. It's always good to do a little rant and it magically starts to work after that 
Keep up the good work oliver!
And bring back panning to all channels and nano2 will be perfect. 
Great job Oliver, note value was really important for me, but volca synchro was the most important 
Thanks for this great soft.
Quick question. Is there a way to tell the difference between the normal and detune mode on the S channel? Thanks
You made the beat grid display so much better! I love being able to tell -when- my step pause will play and you made it crystal clear! 
(also, the note value thing is a great change.)
Ok I feel like a real dingus here.. Note values showed up when I first updated but now they are gone and A+Start in the note menu doesn't seem to do anything. Which menu is one supposed to A+Start in?
Ok I feel like a real dingus here.. Note values showed up when I first updated but now they are gone and A+Start in the note menu doesn't seem to do anything. Which menu is one supposed to A+Start in?
when you updated, did you hold B and hit select+start? your update may not have committed.
Hi Oliver,
I have two nanoloop 2.5 and one nanoloop 2.3.
I had success flashing two card, the 2.3 and the 2.5.
One of the 2.5 cart is able to be updated but when I boot it, it is frozen on :
===================================
nanoloop
v.2.7.9
2
====================================
The number "2" on the right, let me think it is a software/hardware issue, maybe a bad flash or something.
Just before the "2" number, there is a "II", it seem to be a Pause, icon.
What can you tell me about this issue, could I fix it myself ?
Regards,
Johann
PS : I have now try to downgrade to 2.7.6, then to 2.6.0.
Same issue, the number "2", is written on the right of the screen, so I think, this cart is maybe broken.
Last edited by yoyz2k (Jan 16, 2016 9:27 pm)
Note! wrote:Ok I feel like a real dingus here.. Note values showed up when I first updated but now they are gone and A+Start in the note menu doesn't seem to do anything. Which menu is one supposed to A+Start in?
when you updated, did you hold B and hit select+start? your update may not have committed.
Aha, that may be it. You just B+select+start at any time? Didn't realize I had to commit.
Thanks