Offline
NUMBSKULL

.

Last edited by catskull (Jun 22, 2015 5:02 pm)

Offline
Unsubscribe

Geez guys get a room.

Offline
New Zealand
Jazzmarazz wrote:

Maybe I was wrong about him speaking with kitsch

Furrtek mentioned he had contact with Kitsch-Bent earlier in this thread.

furrtek wrote:

Kitsch-Bent and I are in contact and we're having some plans for the future...

I had a lot of hope for this project. My plan was to just use it as a midi sync'd synth via the nanoloop usb-midi adapter with on the fly adjustable parameters via the potentiometers. If mine arrives I still hope I can get some use out of it.

Offline

FYI, I received nothing and raise dispute in Paypal and seems like I have take my money back.

Offline
Paris

Projet's dead, had really hard communication with him on twitter. What a shame....

Offline
Madriz, Supain
Biere Gratuite wrote:

Projet's dead, had really hard communication with him on twitter. What a shame....

OH NO CANT YOU JUST WAIT A FEW MORE MONTHS?

Sorry, I had to make the joke.



This is really a shame . So much potential.

Offline
Paris

Happy with your useless unfinished and never will be cartridge? At least I'll have my money back.

Offline
New Zealand

I thought there was only 45 Days to open a dispute?

From the paypal site

"You can open a dispute in the Resolution Center within 45 calendar days of payment. By opening a dispute, you are able to communicate directly with your seller to work out a problem transaction."

I tried to email a couple of weeks after he tweeted he was sending the items as is as is but didn't get a response.

Last edited by Pathogenic (Aug 5, 2015 10:52 am)

Offline
Paris

Still worked for me

Offline
Santiago, Chile

Kitsch Bent is selling units again, so I bought one smile
But I have troubles syncing to MIDI via Arduinoboy...

I use Catskull's (legacy) Arduinoboy-Shield, flashed with the no-ps2 branch (https://github.com/catskull/Arduinoboy/tree/no-ps2), and I think hardware-side all is fine, as I can sync to Nanoloop 2 without problems.

But I can't get it to work with gb-303:

* Using LSDJ-sync on gb303 and "sync" mode on Arduinoboy the signal is received, but the step cursor is only flashing on the first step, it does not advance. I thought this would be the correct way, but the cursor does not advance (I guess it gets reset with each step)

* I tried "LSDJ Midi In" with "LSDJ Midi out" on Arduinoboy, but it does nothing.

* If I switch to "syncmap" on Arduinoboy (with "LSDJ-sync") with midi-in running, gb303 *does* sync to the beat, but after that it clears all the steps in gb303 and shows the stock pattern. If I modify it live, the pattern resets when it reaches step 1. But it *does* react to tempo changes via midi. This does not work if I select that mode on the Arduinoboy directly and press play after, only if I switch through modes with midi-in running. Strange, but at least something is happening, but pretty useless b/c it resets the pattern.

Any suggestions how to get it running?
Thanks in Advance Jekyll

PS: there is a Facebook-Group for gb303, but it's closed and I am still waiting for approval...

Offline
NUMBSKULL

First thing is I'd not use that branch, I actually didn't even realize that existed. You might have to install the PS2 library but I'd say run the latest code!

Offline
Santiago, Chile

Wow, years-old thread and an answer in hours, nice! Appreciate that, as you stated clearly you don't support that shield any more.

I tried with Arduinoboy-master from your Github, tested real quick, seems to behave exactly the same.
Will go more in depth over the weekend, also have a nanoloop-usb-midi laying around, maybe that can at least make it play a note.

Just to make sure: to just sync via MIDI, the correct way would be "sync" on Arduinoboy and "LSDJ-slave" on the gb303, right?!
I deactivated Note, CC and Program Change TX from my MIDI source to make sure to not accidentally reset the sequence. Keeps retriggering the first step over and over.

I use a GBA Sp, but that doesn't matter, does it? My DMG is on another continent, will take me a few months to rule that out....

Last edited by Jekyll (Aug 7, 2021 5:26 pm)

Offline
Sweden

Maybe a long shot, but make sure you use a GBP/GBC link cable and not GBA. The pins are in the wrong order on GBA cables.

Offline
Santiago, Chile

Good point, but I use a genuine Nintendo Split-Cable (MGB-010),so I should be good...

Will keep on testing different things over the weekend and report back

Offline
Philadelphia, PA

Curious for any reports on how it interacts with LSDJ.

Offline
Philadelphia, PA

-dual post-

Last edited by sloopygoop (Aug 9, 2021 8:24 pm)