lSDJ to mp3 (Page 1 of 2)

lol

Or just plug the headphone jack into your mic jack. Yes, I've done this before.

Certain motherboards don't support this function.

I think you should perhaps learn a little about audio recording, equipment and both software.
A good place to stop at is Wikipedia.
This is also a good place to find (very basic) info on recording audio on a pc.
http://www.pcrecording.com/
A good knowledge of the right cabling is good too. (eg the difference between different TRS connectors)

If you're using an emulator I'd recommend using BGB to record your audio and not the 'headphone output to mic input' option, as it exports directly to WAVE and you'll avoid any noise from USB or perhaps your powersupply, assuming that you don't have knowledge of audio grounding.
This is also good if you want to make adjustments to your LSDJ mix in realtime as you will be able to listen to your song as you record in BGB.
Make sure that you record at 44.1khz or higher, with 16-bit audio or your sound will suffer.

To convert your WAVE file you will need to get an encoder and a bit of software that enables conversion.
Download LAME encoder (http://lame.sourceforge.net/download.php) and Audacity (or alternatively Foobar2000*) and get that shit changed!

*possibly the greatest media player ever, can play ALL chiptunes, modules, audio, and can convert to whatever you please in bulk.

Last edited by CMDR (Feb 13, 2010 11:13 pm)

I think anything with MIDI can do that if you buy something expensive like a MIDI->GB or whatever it's called. I think Low-gain will sell you one.

I dunno about .sav because that's many songs, but it might be possible with the .lsdsng or whatever from the lsdj file manager, or at least something that can play lsdsngs

herr_prof, true...
a solution to this could be jump into the pattern to pattern, no matter if the song have BLANK patterns. I suppose "you will have to compose" to export songs easly.

An example... in LSDJ

       PU1   PU2   WAV  NOI
00    00     10      30      40  \
01     --      --        --       --    } it jump between blank patters
02    00     10      30      40 <
03     --      --        --       --    } it jump between blank patters
04    00     10      30      40  /
05    00     10      30      40
06    00     10      30      40
07     --      --        --       --
08     --      --        --       --
09     --      --        --       --
10     --      --        --       -- 
11     --      --        --       --  <<< if the batch/program or whatever find out 5 blank pattern he will just stop the render.

Shouldnt be hard to do it i guess, obviously if is possible

LSDJ will sync with LSDJ with the use of a link cable and there's also an LSDJ to Nanoloop sync feature in both programs that you could try.  MIDI has also been mentioned I suppose.  If you ever want to make something of your own to sync with LSDJ, the clock pin on the link cable outputs 48 pulses per quarter note I believe.  Skip to 3:26 in my Speak and Sequence Video as that's where I've used a home-made LSDJ sync with a home-made cable.