chipmusic.org is an online community in respect and relation to chip music, art and its parallels.
You are not logged in. Please login or register.
ChipMusic.org / Forums / Tutorials, Mods & How-To's / Some first steps in Houston Tracker (Livestream)
Hi mates, here you can see the livestream that was recorded today at the OCM Oldenburg in northern Germany. My friend Marcel show some stuff at the Pro Tracker on an Amiga 500 and i at 31:12 show you some first steps in the Houston Tracker on an TI83Plus.
Best regards duality micro
Last edited by dualitymicro (Aug 18, 2021 8:30 am)
Hey, I have a problem with my TI, for some reason my netbook don't detect the calculator.
When I connect the serial adapter the pc show me a screen that tells me to install a driver for the serial adapter, but doesn't let me use it.
Need more info: which calc, cable type, transferrer software, OS?
Need more info: which calc, cable type, transferrer software, OS?
Hi, I'm using a TI-83+ with a blacklink cable I guess it is. The transfer I try to use TiLP and TI connect and the OS a winxp and a win7x64.
Last edited by Ray_N (Oct 16, 2022 2:14 pm)
TiLP and TI-Connect can't co-exist, so you should completely uninstall both (including any drivers that came with them) and then re-install one of the two. Since you're using an 83+, you could go with TI-Connect. OTOH TiLP gives you more options to fiddle with. You can always try to force things via the TiLP device setup (File->Change Device), regardless of whether your OS recognizes the cable or not.
DB9 to USB adapters are also known to not work for this stuff, though I don't know about the specific one you have.
TiLP and TI-Connect can't co-exist, so you should completely uninstall both (including any drivers that came with them) and then re-install one of the two. Since you're using an 83+, you could go with TI-Connect. OTOH TiLP gives you more options to fiddle with. You can always try to force things via the TiLP device setup (File->Change Device), regardless of whether your OS recognizes the cable or not.
DB9 to USB adapters are also known to not work for this stuff, though I don't know about the specific one you have.
Well, I delete everything and reinstall tilp and still doesn't work, so I delete again and install ti-connect, and there the program work. I installed doorcs7 and that goes very well, but when I put the ht2s.8xp that ask me to rename the file, and when finish installing, the program says doesn't work and ask me to reinstall it. I tried with the ht2.8xp and the same happens.
Huh? I thought I fixed that back in v2.20. What program says it doesn't work? Doors?
A possible work-around is to install everything in an emulator, create a backup (.8xb file), and transfer that to the real calculator.
Huh? I thought I fixed that back in v2.20. What program says it doesn't work? Doors?
A possible work-around is to install everything in an emulator, create a backup (.8xb file), and transfer that to the real calculator.
No, the Houston.
When I throw that in TI-connect, the program shows like is installing in the TI-83+, 2 minutes later, the program says there's an error in the name or something like that, I select rename the file and the namefile the program shows is something like this "HT2 ", I'm just delete the blank characters and let the HT2 name, let the program install, and when the program finish the 100%, shows a window who says the program can't install it because is a wrong format or something like that. I try it like 5 times I guess and all the time is the same.
Doors works very well, that install it in 10' or 15' I guess, but works fine.