97

(4 replies, posted in Releases)

Oooo A new one?

Sorry, I'm not familiar with adapters, so I can't say. I think the best way is to ask eVADE/ duality micro for nanoloop 2 = Monotribe/ Volca sync cable (GBA/ GBA SP Master Mode). There should't be any problem to make custom one for you, if they have some GBA connector.

LSDJ (looking to 4.9.1 manual) have analog clock in and out possibilities
http://www.littlesounddj.com/lsd/latest … _4_9_1.pdf
http://littlesounddj.wikia.com/wiki/Ana … patibility
so both synces are possible (GBA as master and PO12 as slave or PO12 as master and GBA as slave)

Audio in on gameboy sould't bother you

if PO12 would be a master, split audio out on PO12 (right jack on the unit) with cable for audio and clock, send audio to mixer and clock to gameboy serial port and send audio from gameboy to mixer
PO12 should be in SY1 sync mode (check the manual)

if Gameboy would be a master, send audio from gameboy to mixer, send clock from gameboy serial port to PO12 (left jack on the unit) and send audio from PO12 (right jack on unit) output to mixer
PO12 should be in SY2 sync mode (check the manual)

http://www.cheapmonday.com/pocket-opera … Manual.pdf

Sorry, this one will work, if you like to have PO12 as master
If you want LSDJ as master, you have to wire your own cable from GBA, because there
https://evadeanddualitymicro.bandcamp.com/merch
is only one cable for GBA (as a slave) and two cables for DMG (slave and master), serialport on GBA and DMG is different, so you can't use cable for DMG and you need cable for GBA (as master)...


ryba wrote:

PO12 manual says:
when sync is used the signal will be split between audio (right) and sync (left)
So sync signal of PO12 is on Tip of stereojack, as on other devices (e.g. volcas) and Audio is on ring of stereojack of PO12
this one should work, but you have to get another cable for spliting PO12 output jack
https://evadeanddualitymicro.bandcamp.c … slave-mode
something like this one:
http://ev-entz.com/stagg-yc-0-1-1j2jfh- … -jack.html

Yes, There should be analog clock output from LSDJ since 4.8.0 version
http://www.littlesounddj.com/lsd/latest … _4_8_0.pdf
I didnť try in anyway wink

PO12 manual says:
when sync is used the signal will be split between audio (right) and sync (left)
So sync signal of PO12 is on Tip of stereojack, as on other devices (e.g. volcas) and Audio is on ring of stereojack of PO12
this one should work, but you have to get another cable for spliting PO12 output jack
https://evadeanddualitymicro.bandcamp.c … slave-mode
something like this one:
http://ev-entz.com/stagg-yc-0-1-1j2jfh- … -jack.html

I also thought about 10 position rottary switch,because I couldn't find anything else. But I'd rather use something simmilar to original casio locking switches, because it seems much faster and comfortable for switching presets...

OK
I got this nice Casiotone from a friend of mine (although I have some others from this family - like MT100), This one have fullsize keys, thus it's much more playable for me.
I'm planning to modify it. It has only 6 locking switches for sounds (12 tone presets at all)
I'd like to add all possible sounds to it, so I need matrix of 10 locking switches turning each other off.
I need to disconnect other switches by turning one switch on.
Has anyone some experiences, how to do this?
Thanks

Melodic basslines on Click channel could sound ok, but it depends on other channels. Click channel is affected in some way by other channels and in some cases off notes could be disguised and in some cases uncovered.

wink
It's little bit tricky to get some melodic basslines in click channel (get it right in tuning).

107

(76 replies, posted in Releases)

For me it's actually this (although it's 10 years old)
https://vimeo.com/2148419
Music, which is based on rhythm and new sounds, produced by a chip, Musicians, who are searching new noise palettes. Music, wich is not based on melodies, but polyrhythms made by blips.

7x7x7 patterns in Nanoloop mono recorded directly it to my casette 4 track, than procesed live by delay and stereo chorus. No song structure, just live switching patterns. The take is little bit noisy, but what the hell.
Click channel is bassy as hell. It kicks my eardrums deeper into my head.
http://chipmusic.org/ryba/music/777nanoloopmono

Thanks! Works in mono too.

When I save empty pattern (I want to clear pattern), number of that pattern doesn't go bright, it remains grey. Is it intention, or should this be fixed?

I tried to sync it to my Korg polysix arpeggio (as master), it worked right, but I wasn't satisfied with this combination. Syncing to Roland TR606 trigger will come asap.

My first 6 petterns 2xr - 2xc - 2xn in Nanoloop Mono. Thanks Ondrej from Bastl instruments for lending me his cart.
Funny as my nanoloop 1.2. Nice work, Oliver. Again. Thanks
http://chipmusic.org/ryba/music/6golden … noloopmono
Edit: It's actually twice funnier as my NL1.2 at least. Can't give it Ondrej back, so he ordered another one wink